They are designed for use with either down or head guys, and are also designed for steep angle guying (10°) without the guy strand slipping off the hook. A generous radius for the guy wire prevents kinking or injury to the strand. It is ideally suited for use with a Guying Deadend. Sharp teeth imbed in the wood and prevent slippage down the pole under load. For steel and concrete poles, the 2 Hole Guy Hook prevents turning while increasing the bearing surface.
When a single Guy Hook is mounted on the pole, the square head of the through bolt is trapped in the recessed section, preventing it from turning when the nut is tightened. For mounting on the opposite end of the through bolt the Guy Hook is furnished with an integral adapter that provides a bearing surface for the nut.
A separate adapter (Number 60628) is available for use on the nut end of the bolt.
|Cat. No.||MC||Description||Bolt Size in||Bolt Size in||Yield Strength lbs||Standard Package||Unit Weight lb|
|60624||15155||Guy Hook Only||0.62||10000||25||1.1|
|60625||15156||Guy Hook Only||0.75||12000||25||1.1|
|60626A||81010||Guy Hook with Adapter||0.62||0.75||12000||25||1.2|
|60627||83589||Guy Hook - 2 Hole||0.75||12000||25||1.8|