transmission

catalogue > transmission > Bolts

Bolts: Ball Link Eye

Ball Link Eye Bolts provide a strong flexible support for socket type suspension insulators.
They are used at either dead-end or suspension positions.
The Ball Eye used is Cat. No. 22007.

Standard sizes are tabulated. Each bolt has 6 inches (152.4mm) of thread and one hex nut except 6'' (`152mm) length has 4'' (102mm) thread.


The 3/4 inch (19.1 mm) size exceeds CSA C83 Charpy Level 1.5

Other lengths are available upon request
5/8'' (15.9 mm) Available in higher strength on request

Cat.No. MC Diameter inLength inMin. Breaking Strength lbsStandard Package Unit Weight lb
66785H836340.636.0014120102.1
86785H830120.638.0014120102.2
106785H102570.6310.0014120102.4
126785H102580.6312.0014120102.6
146785H102590.6314.0014120102.8
166785H102600.6316.0014120103.0
186785H102610.6318.0014120103.1
62478125670.758.0025000103.2
62480125680.7510.0025000103.5
62482139840.7512.0025000103.8
62484142950.7514.0025000104.0
62486142970.7516.0025000104.3
62488141490.7518.0025000104.5