Clamp: Dead-End

Dead-End Clamp for No. 6 solid to No. 1/0 stranded copper has malleable iron clamping members and is supplied with high strength steel U-bolts and...

Clamp: Duckbill

Duckbill Clamps are designed for temporary grounding.They are hot stick applied and can have various types of ground cables attached using copper...

Clamp: Ground

This malleable iron clamp is used to ground from steel strand 1/4" (6.4mm) to 3/8" (9.5 mm) to a copper ground wire #9 to #4 size.

Clamp: Guy

SLACAN Guy Clamps are made from hot rolled steel bars. The straight parallel grooves provide maximum holding area. The ends are sheared in a manner...

Clamp: Neutral Conductor

Neutral conductor clamps are made from ductile iron for clamping #2 ACSR to 336.4 ASC diameters .316 inch (8 mm) to.666 inch (16.9 mm). They are...

Clamp: Neutral Span

Neutral span clamps are used to enable connecting of service drops in mid span. The clamp is attached to the conductorand the service drop clamp is...

Clamp: Parallel Groove

The parallel groove clamps are made in aluminium or malleable iron.The large groove accommodates .25 - .81 (6.4 - 20.6 mm) diameter cableThe small...

Clamp: Post Insulator - 1 Bolt

These clamps are for use on both horizontal and vertical "Clamp-Top" line post insulators, and fit directly to the pintle bolt clamp support provided...

Clamp: Post Insulator - 2 Bolt

These clamps are for use on both horizontal and vertical "Clamp-Top" line post insulators, and fit directly to the pintle bolt clamp support provided...

Clamp: Rest, Live Line

Material: Bolt - galvanized steel Clamp Rest - cast bronzeThese are used to clamp onto the neck of a pin insulator to tap off to a transformer.

Clamp: Saddle

This cast aluminum clamp is used to support ground or neutral wires.It accommodates a conductor range of #6 to 4/0 AWG. The groove curvature allows it...

Clamp: Standoff Cable

Clamp: Strain Bolted Angle

This cast aluminum alloy clamp is used for suspending conductors in high angle locations and accommodates #2 AWG ACSR to 556.5 MCM ASC with exit...

Clamp: Strain Dead-End

Dead-end Strain Clamps are made from high strength alumimum alloy with hot dip galvanized U-bolts.Mechanical strength of the clamps are 9,000 lb (40...

Clamp: Suspension-Triplex

This cast aluminum alloy Suspension clamp is designed to support Triplex secondary conductors #2 to 4/0 ACSR at the pole. One clamp section is tapped...